Master-Clip Thermo- and Isolierschläuche
Technical data, custom designs and forms of delivery
DN work. pressure
ca. bar
low pressure
ca. mmWS
bend radius
ca. mm*
weight
ca. kg/m
article no.
38 280-038-...
40 280-040-...
45 280-045-...
50 280-050-...
55 280-055-...
60 280-060-...
65 280-065-...
70 280-070-...
75 280-075-...
80 280-080-...
90 280-090-...
100 280-100-...
110 280-110-...
120 280-120-...
125 280-125-...
130 280-130-...
140 280-140-...
150 280-150-...
160 280-160-...
170 280-170-...
175 280-175-...
180 280-180-...
200 280-200-...
215 280-215-...
225 280-225-...
250 280-250-...
275 280-275-...
300 280-300-...
* Referring to inner side of the elbow of hose.
The above mentioned data refers to an average and ambient temperature of +20°C.
Subject to technical changes and colour variations. Please refer to technical data sheet when selecting hose.
end number must be determined by construction

Delivery forms:
Standard production:
  • DN 38 - DN 300
  • Production lengths: max. 4 m
Available on request:
  • special diameters
  • special lengths
Following table shows the medium temperature and the temperature of insulated side at warm air of +20°C and hose diameter of 50mm. Insulating value can be reduced up to 10% by using greater diameters. This information can only be used as a guide.
temperature of agent °C insulation thickness of
  20 mm 30 mm 40 mm
50 28 24 23
100 32 28 27
150 40 36 32
200 49 42 37
250 59 49 42
300 74 57 48
350 79 65 55
400 85 75 62
450 102 85 70
500 111 96 79
550 127 109 89
600 143 122 100

Installation and connection possibilities (further possibilities)

Clip-Grip Hose clamp Clip-Grip
Hose clamp
Quick Action Clamp Clip-Grip Quick Action Clamp
Reduzierung Hose reducer, symmetrical Hose connector Hose connector