Master-SIL 1
Technical data, custom designs and forms of delivery
DN work. pressure
ca. bar		 low pressure
ca. mmWS		 bend radius
ca. mm*		 weight
ca. kg/m		 article no.
13 1,700 5200 8 0,10 685-013-119
19 1,600 5100 8 0,11 685-019-119
25 1,600 5100 8 0,12 685-025-119
30 1,400 5000 10 0,14 685-030-119
32 1,400 5000 10 0,14 685-032-119
35 1,300 5000 11 0,15 685-035-119
38 1,300 5000 12 0,17 685-038-119
39 1,300 5000 12 0,17 685-039-119
40 1,300 4800 13 0,20 685-040-119
41 1,300 4800 13 0,20 685-041-119
42 1,200 4600 14 0,21 685-042-119
44 1,200 4600 14 0,21 685-044-119
45 1,200 4600 14 0,21 685-045-119
50 1,200 4300 16 0,25 685-051-119
51 1,200 4300 16 0,25 685-051-119
55 1,100 4200 18 0,27 685-055-119
57 1,100 4100 18 0,28 685-057-119
60 1,100 4000 20 0,30 685-060-119
62 1,100 3900 21 0,31 685-062-119
63 1,100 3900 22 0,32 685-063-119
64 1,100 3900 22 0,32 685-064-119
65 1,100 3800 22 0,34 685-065-119
70 1,100 3600 24 0,36 685-070-119
72 1,100 3500 25 0,38 685-072-119
76 1,100 3400 27 0,41 685-076-119
80 1,000 3200 28 0,44 685-080-119
83 1,000 3100 28 0,46 685-083-119
90 1,000 3000 29 0,49 685-090-119
91 1,000 3000 29 0,49 685-091-119
95 0,900 2800 32 0,56 685-095-119
100 0,900 2600 35 0,65 685-100-119
102 0,900 2600 35 0,65 685-102-119
108 0,900 2400 38 0,68 685-108-119
110 0,900 2400 38 0,69 685-110-119
114 0,900 2200 40 0,71 685-114-119
115 0,900 2200 40 0,72 685-115-119
120 0,800 2000 43 0,76 685-120-119
125 0,800 1700 46 0,79 685-125-119
127 0,800 1700 46 0,80 685-127-119
130 0,800 1700 47 0,82 685-130-119
140 0,700 1500 48 0,90 685-140-119
150 0,700 1400 50 0,97 685-150-119
152 0,700 1400 51 0,99 685-152-119
160 0,600 1300 53 1,05 685-160-119
165 0,600 1200 55 1,08 685-165-119
180 0,600 1100 60 1,19 685-180-119
185 0,500 1000 62 1,22 685-185-119
203 0,500 700 68 1,33 685-203-119
229 0,400 580 84 1,48 685-229-119
254 0,400 400 102 1,68 685-254-119
300 0,200 200 120 2,00 685-300-119
305 0,200 200 123 2,05 685-305-119
* Referring to inner side of the elbow of hose.
The above mentioned data refers to an average and ambient temperature of +20°C.
Subject to technical changes and colour variations. Please refer to technical data sheet when selecting hose.

Forms of delivery:
Standard production:
  • DN 13 - DN 305
  • Colour: red
  • Production lengths: 4 m
 Available on request:
  • special diameters
  • special lengths
  • with spiralfree cuffs
  • other fabric qualities
Installation and connection possibilities(further possibilities)

schneckengewinde_grau.jpg - 2kb Hose clamp with worm gear drive Hose clamp, bolt clamp Hose clamp, bolt clamp
Reduzierung Hose reducer, symmetrical Hose connector Hose connector