Master-Clip HT 650
Technical data, custom design and forms of delivery
DN low pressure
ca. mmWS		 bending radius
ca. mm*		 weight
ca. kg/m		 article no.
50 3950 30 1,10 229-050-111
55 3500 33 1,19 229-055-111
60 3180 36 1,29 229-060-111
65 2990 39 1,38 229-065-111
70 2640 42 1,47 229-070-111
75 2550 45 1,57 229-075-111
80 2280 48 1,66 229-080-111
90 2090 54 1,85 229-090-111
100 1680 60 1,57 229-100-111
110 1390 66 1,71 229-110-111
120 1180 72 1,85 229-120-111
125 1050 75 1,93 229-125-111
130 990 78 2,00 229-130-111
140 880 84 2,14 229-140-111
150 760 90 2,29 229-150-111
160 670 96 2,43 229-160-111
170 590 102 2,57 229-170-111
175 560 105 2,65 229-175-111
180 520 108 2,72 229-180-111
200 420 120 3,01 229-200-111
215 380 151 3,22 229-215-111
225 350 158 3,36 229-225-111
250 290 175 3,72 229-250-111
275 230 193 4,08 229-275-111
300 190 210 4,44 229-300-111
315 180 221 4,66 229-315-111
325 170 228 4,80 229-325-111
350 150 245 5,16 229-350-111
375 130 263 5,55 229-375-111
400 110 280 5,91 229-400-111
450 90 360 6,63 229-450-111
500 70 400 7,35 229-500-111
550 60 440 8,07 229-550-111
600 50 480 8,79 229-600-111
700 40 560 10,23 229-700-111
800 30 640 11,67 229-800-111
900 25 720 13,11 229-900-111
* Referring to the inner side of the elbow of hose.
The above mentioned data refers to an average and ambient temperature of +20°C.
Subject to technical changes and colour variations. Please refer to technical data sheet when selecting hose.

Forms of delivery:
Standard production:
  • DN 50 - DN 900
  • Colour: silver grey
  • Production lengths: 3 m und 6 m
 Available on request:
  • special diameters
  • Colour: red
  • special lengths up to ca. 15m
  • custom design with other pitches
  • external helix also in stainless steel (1.4512 or 1.4301)
Installation and connection possibilities(further possibilities)

Clip-Grip Hose clamp Clip-Grip
Hose clamp		 Quick action clamp Clip-Grip Quick action clamp
Reduzierung Hose reducer, symmetrical Hose connector Hose connector
Small amounts of smoke maybe given off when used under positive pressure or with low extraction rates. For a gas tight requirement we recommend our hose types Master-Clip HT 500 or HT-pressure hoses