• -260°C up to +400°C*
Catalogue register 12.8
Material
hose wall: one side KAPTON® laminated glass fabric
external helix: galvanized steel
DN 50 - DN 900
- fume extraction in low pressure applications
- vehicle and engine construction
- exhaust fume extraction from performance test beds in the motor vehicle industries
- extraction of corrosive gas at higher temperatures
- gas tight in high low pressure applications
- good vacuum resistance
- very good temperature resistance
- hardly inflammable, non melting KAPTON® coating
- external steel helix protects against abrasion
- very flexible
- small bend radius
- very good chemical resistance (same resistance as Master-Clip TEFLON® hoses but in a much wider Temperature Range)
- special clamping method guarantees high tensile strength between hose material and external helix
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts
and gases of low conductivity. Clip ends shall be earthed at both sides and
helix pitch shall be < 30 mm to ensure static dissipation - RoHS compliant
| 1 | external helix |
| 2 | hose wall: one side KAPTON® laminated glass fabric |
