Master-Clip ISO-CAR
Technical data, custom design and forms of delivery
DN work. pressure
ca. bar		 low pressure
ca. mmWS		 bending radius
ca. mm*		 weight
ca. kg/m		 article no.
38 0,940 4480 23 0,55 226-038-120
40 0,930 4380 24 0,55 226-040-120
45 0,920 4140 27 0,60 226-045-120
50 0,900 3895 30 0,60 226-050-120
55 0,850 3340 33 0,70 226-055-120
60 0,780 2925 36 0,70 226-060-120
65 0,670 2635 39 0,80 226-065-120
70 0,670 2280 42 0,90 226-070-120
75 0,620 2115 45 1,00 226-075-120
80 0,610 1890 48 1,00 226-080-120
90 0,560 1645 54 1,20 226-090-120
100 0,510 1320 60 1,30 226-100-120
110 0,480 1095 66 1,30 226-110-120
120 0,360 930 72 1,40 226-120-120
125 0,330 825 75 1,40 226-125-120
130 0,280 780 78 1,60 226-130-120
140 0,250 690 84 1,60 226-140-120
150 0,220 600 90 1,80 226-150-120
160 0,210 552 96 1,80 226-160-120
170 0,190 465 102 2,00 226-170-120
175 0,185 440 105 2,10 226-175-120
180 0,172 410 126 2,10 226-180-120
200 0,148 330 140 2,40 226-200-120
215 0,128 295 151 1,90 226-215-120
225 0,115 275 158 2,00 226-225-120
250 0,100 225 175 2,20 226-250-120
275 0,080 180 193 2,30 226-275-120
300 0,070 150 210 2,40 226-300-120
315 0,062 140 221 2,40 226-315-120
325 0,059 130 228 2,50 226-325-120
350 0,056 115 245 2,90 226-350-120
375 0,050 100 300 3,20 226-375-120
400 0,047 85 320 3,40 226-400-120
450 0,045 70 360 4,00 226-450-120
500 0,043 55 400 4,50 226-500-120
550 0,042 50 440 5,10 226-550-120
600 0,039 40 480 5,60 226-600-120
700 0,031 30 560 6,60 226-700-120
800 0,022 25 640 7,60 226-800-120
900 0,016 20 720 8,60 226-900-120
* Referring to the inner side of the elbow of hose.
The above mentioned data refers to an average and ambient temperature of +20°C.
Subject to technical changes and colour variations. Please refer to technical data sheet when selecting hose.

Forms of delivery:
Standard production:
  • DN 38 - DN 900
  • Colour: inside silver grey, outside green grey
  • Production lengths: 3 m und 6 m
 Available on request:
  • special diameters
  • special lengths up to ca. 15m
  • custom design with other pitches and
    helix sizes
  • external helix also in stainless steel (1.4512 or 1.4301)
Installation and connection possibilities(further possibilities)

Clip-Grip Hose clamp Clip-Grip
Hose clamp		 Quick action clamp Clip-Grip Quick action clamp
Reduzierung Hose reducer, symmetrical Hose connector Hose connector