• -60°C up to +300°C
• intermittent to +350°C*
• intermittent to +350°C*
Catalogue register 12.7
Material
hose wall: two layers, inner layer heat resistant impregnated glass fabric, outer layer special coated high temperature fabric
external helix: galvanized steel
DN 38 - DN 900
- diesen engine test beds with raised extraction speed
- flue gas exhaust
- hot air
- suction plants
- vehicle construction
- engine construction
- aircraft industries
- defence industries
- general engineering
- low pressure applications
- primarily suited as suction hose
- very good temperature resistance
- hardly inflammable
- high resistant to mechanical damage
- vibrationproof
- abrasion resistant
- very flexible
- compressible ca. 1:4
- small bend radius
- good vacuum resistance
- external steel helix protects against abrasion
- special clamping method guarantees high tensile strength between hose material and external helix
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts
and gases of low conductivity. Clip ends shall be earthed at both sides and
helix pitch shall be < 30 mm to ensure static dissipation - RoHS compliant
| 1 | external helix |
| 2 | outer layer: special coated high temperature fabric |
| 3 | inner layer: heat resistant impregnated glass fabric |
