• -60°C up to +300°C
• intermittent to +350°C*
• intermittent to +350°C*
Catalogue register 12.5
Material
hose wall: two layers
inner layer: heat resistant impregnated glass fabric
outer layer: Silicon coated glass fabric
external helix: galvanized steel
DN 50 - DN 900
- ducting of hot air
- suction plants with erhöhten Absaugleistungen
- vehicle construction
- engine construction
- aircraft industries
- defence industries
- general engineering
- low pressure applications
- very high temperature resistance
- hardly inflammable
- very flexible
- extremely compressible ca. 1:4
- small bend radius
- good vacuum resistance
- conditionally vibrationproof
- external steel helix protects against abrasion
- special clamping method guarantees high tensile strength between hose material and external helix
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts
and gases of low conductivity. Clip ends shall be earthed at both sides and
helix pitch shall be < 30 mm to ensure static dissipation - RoHS compliant
| 1 | external helix |
| 2 | hose wall: outside Silicon coated glass fabric |
| 3 | hose wall: inside heat resistant impregnated glass fabric |
