• -20°C up to +650°C
• intermittent to +750°C*
• intermittent to +750°C*
Catalogue register 11.8
Material
hose wall: two layer construcion, inner and
outer layer high temperature fabric, especially coated, with heat stabilizers, reinforced by woven in stainless steel wire
external helix: galvanised steel
DN 50 - DN 900
- exhaust fume extraction from performance test beds in the motor vehicle industries
- flue gas exhaust
- vehicle and aircraft industries
- engine construction and exhaust fume extraction
- shipbuilding industries
- mechanical engineering
- furnace construction
- iron and steel works
- infrared dryer plants
- radiant heat protection
- very good temperature resistance
- flame retardant and non flammable
- high resistance to mechanical load
- improved vibration resistance by woven in reinforcement
- flexible
- axialy compressible
- small bend radius
- conditionally suitable for continuall flexing
- good vacuum resistance
- silicone free
- external steel helix protects against abrasion
- special clamping method guarantees high tensile strength between hose material and external helix
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts
and gases of low conductivity. Clip ends shall be earthed at both sides and
helix pitch shall be < 30 mm to ensure static dissipation
| 1 | external helix |
| 2+3 | inner and outer layer: high temperature fabric, especially coated, with heat stabilizers, reinforced by woven in stainless steel wire |
