• -20°C up to +450°C
• intermittent to +500°C*
• intermittent to +500°C*
Catalogue register 11.7
Material
hose wall: two layer construcion,
inner layer heat resistant impregnated glass fabric
outer layer special coated high temperature fabric, reinforced by woven in stainless steel wire
external helix: galvanised steel
DN 50 - DN 900
- diesel engine test beds with raised extraction speed
- flue gas exhaust
- hot air
- exhaust equipment
- vehicle construction
- engine construction
- aircraft industries
- defence industries
- mechanical engineering
- low pressure applications
- primary suited as suction hose
- very good temperature resistance
- hardly inflammable
- high resistance to mechanical load
- higher vacuum resistance durch eingewebte Verstärkungskomponeten
- abrasion resistant
- very flexible
- axialy compressible
- small bend radius
- free of silicone
- external steel helix protects against abrasion
- special clamping method guarantees high tensile strength between hose material and external helix
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts
and gases of low conductivity. Clip ends shall be earthed at both sides and
helix pitch shall be < 30 mm to ensure static dissipation
| 1 | external helix |
| 2 | hose wall: outside special coated high temperature fabric, reinforced by woven in stainless steel wire |
| 3 | inside: heat resistant impregnated |
