Miniflex PVC
Technical data, custom designs and forms of delivery
DN PG work. pressure
ca. bar		 low pressure
ca. mmWS		 bend radius
ca. mm*		 outer-Ø
ca. mm		 weight
ca. kg/m		 article no.
# 7 7 0,230 7700 10 10 0,06 440-007-102
# 10 9 0,220 7600 14 14 0,12 440-010-102
# 13 11 0,210 7550 17 17 0,13 440-013-102
# 15 13,5 0,200 7500 19 19 0,14 440-015-102
# 16 16 0,200 7500 21 21 0,19 440-016-102
# 22 21 0,180 7350 27 27 0,25 440-022-102
25 - 0,170 7250 30 30 0,32 440-025-102
# 30 29 0,150 7000 36 36 0,38 440-030-102
32 - 0,130 7000 38 38 0,46 440-032-102
# 38 36 0,110 6750 45 45 0,61 440-038-102
40 - 0,100 6750 47 47 0,63 440-040-102
# 44 42 0,090 6000 52 52 0,79 440-044-102
45 - 0,090 6000 53 53 0,80 440-045-102
# 48 48 0,080 5400 56 56 0,84 440-048-102
50 - 0,080 5250 58 58 0,87 440-050-102
* Referring to inner side of the elbow of hose.
The above mentioned data refers to an average and ambient temperature of +20°C.
Subject to technical changes and colour variations. Please refer to technical data sheet when selecting hose.

Forms of delivery:
Standard production:
  • die with # markierten Nennweiten
  • Colour: grey
  • Production lengths:
    DN 7 - DN 25: 50m
    DN 30 - DN 50: 25m
 Available on request:
  • transparent and coloured
  • special lengths
  • inner steel wire helix
  • special diameters
Installation and connection possibilities(further possibilities)

pgverschraubung_grau.jpg - 2kb cable protecting couplings Heat shrink cuff Heat shrink cuff
pghalter_grau.jpg coupling holder schneckengewinde_grau.jpg - 2kb Hose clamp with worm gear drive