Polderflex Technical data, custom designs and forms of delivery
DN	work. pressure ca. bar	low pressure ca. mmWS	bend radius ca. mm*	outer-Ø ca. mm	weight ca. kg/m	article no.
10	10,000	9000	20	16	0,18	660-010-101
12	9,000	9000	24	18	0,19	660-016-101
#13	9,000	9000	26	19	0,22	660-013-101
14	9,000	9000	28	20	0,23	660-014-101
#16	9,000	9000	22	22	0,27	660-016-101
18	8,000	9000	36	25	0,30	660-018-101
#19	8,000	9000	38	26	0,35	660-019-101
#20	8,000	9000	40	27	0,34	660-020-101
#25	8,000	9000	50	33	0,52	660-025-101
#32	8,000	9000	64	40	0,66	660-032-101
#38	7,000	9000	76	47	0,80	660-038-101
#40	7,000	9000	80	50	0,95	660-040-101
#45	6,000	9000	90	55	1,15	660-045-101
#51	5,000	9000	102	62	1,35	660-050-101
#60	5,000	9000	120	72	1,75	660-060-101
#63	5,000	9000	126	75	1,80	660-063-101
#76	4,000	9000	152	89	2,30	660-075-101
80	4,000	9000	160	93	2,58	660-080-101
90	4,000	9000	270	104	2,95	660-090-101
100	3,000	9000	306	117	3,75	660-100-101
110	3,000	9000	330	127	3,90	660-110-101
127	3,000	9000	381	143	4,80	660-125-101
152	2,000	9000	456	170	6,50	660-150-101
* Referring to inner side of the elbow of hose. The above mentioned data refers to an average and ambient temperature of +20°C. Subject to technical changes and colour variations. Please refer to technical data sheet when selecting hose.

Forms of delivery:
Available from stock: the # marked nominal DN Colour: transparent Production lengths: acc. to DN 20 m - 60 m	Available on request: special diameters special lengths

Installation and connection possibilities(further possibilities)

	Hose clamp, bolt clamp		Hose clamp with worm gear drive		Hose connector
	Hose reducer, symmetrical		Heat shrink cuff		metal socket with cone flange