• -40°C up to +90°C
• intermittent to +125°C*
• intermittent to +125°C*
Catalogue register 5.5
Material
hose wall: electrically conductives polyurethane
spiral: spring steel wire
DN 32 - DN 300
- dangerous areas where electrically conductivity is demanded
- transport and suction hose for extrem abrasive solids, liquid and gaseous media
- extraction of coarse grained particles with highest flow volumetic
- protection hose against high mechanical damage
- surface resistance RO ≤ 104 Ohm
- extremely abrasion resistant by selective reinforcement below the spiral
- good flexibility
- high tensile and tear strength
- free of halogens
- good chemical resistance
- high tensile and tear strength
- nearly smooth inside
- optimum flow characteristics
- resistant to oil and fuels, gas tight
- generally good UV and ozone resistance
- acc. to TRBS 2153 (zone 0, 20) suitable for combustible liquids/dusts.
Spiral ends shall be earthed at both sides to ensure static dissipation - RoHS compliant
| 1 | immovable cast spring steel spiral |
| 2 | hose wall: polyurethane, electrically conductive |
| 3 | wall thickness between spirals ca. 1,7-2,1 mm, according to DN |
| 4 | reinforced abrasion areas |
