• -40°C up to +90°C
• intermittent to +125°C*
• intermittent to +125°C*
Catalogue register 3.9
Material
hose wall: polyether polyurethane
spiral: spring steel wire
DN 16 - DN 500
- transport and suction hose for abrasive solids where resistance to microbes and hydrolysis is necessary
- protection hose against mechanical loadings
- highest abrasion resistant
- microbe and hydrolysis resistant
- gas tight
- good chemical resistance
- free of halogens and heavy metal
- reduced weight
- very flexible
- small bend radius
- nearly smooth inside
- generally good UV- and ozone resistance
- optimum flow characteristics
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts/bulk goods and gases/liquids of low conductivity. Spiral ends shall be earthed at both sides to ensure static dissipation
- RoHS compliant
| 1 | immovable cast spring steel spiral |
| 2 | hose wall: Polyether polyurethane, microbe and hydrolysis resistant |
| 3 | wall thickness between spirals ca. 1,4 mm |
