• -40°C up to +90°C
• intermittent to +125°C*
• intermittent to +125°C*
Catalogue register 3.2
Material
hose wall: polyester polyurethane with additional microbe protection, free of heavy metal (in comparison with polyether polyurethane more abrasion resistant, acc. to DIN 53516)
spiral: spring steel wire
DN 25 - DN 500
- transport and suction hose for abrasive solids where resistance to microbes is necessary for example
- rear suction hose on small sweeping machines,
public utility cleansing and refuse collection vehicles - MD lawn mowers
- lawn sweepers
- leaf suction machines
- feed transport
- protection hose against mechanical loadings
- highest abrasion resistant by using polyester polyurethane
- microbe resistant
- gas tight
- good chemical resistance
- free of halogens and heavy metal
- lightweight
- extremely flexible
- small bend radius
- nearly smooth inside
- generally good UV- and ozone resistance
- optimum flow characteristics
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts/bulk goods and gases/liquids of low conductivity. Spiral ends shall be earthed at both sides to ensure static dissipation
- RoHS compliant
| 1 | immovable cast spring steel spiral |
| 2 | hose wall: polyester polyurethane, microbe resistant |
| 3 | wall thickness between spirals ca. 0,7 mm |
