• -40°C up to +90°C
• intermittent to +125°C*
• intermittent to +125°C*
Catalogue register 2.2
Material
hose wall: polyester polyurethane with addition of flame protector (nach DIN 53516 abrasion resistanter als vergleichbares Polyether polyurethane)
spiral: spring steel wire
DN 40 - DN 500
- hardly inflammabler transport hose for abrasive solids
- woodworking machines
- chips exhaust in woodworking industries
- protection hose against mechanical loadings
- conform to the requirements of the German Professional Woodworking Association
- hardly inflammable acc. to DIN 4102 B1
- very flexible
- high tensile and tear strength
- lightweight
- extrem abrasion resistant
- small bend radius
- continually kink proof
- solvents, oil and fuels resistant
- free of halogens
- generally good UV and ozone resistance
- symmetrically bending
- nearly smooth inside
- optimum flow characteristics
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts/bulk goods and gases/liquids of low conductivity. Spiral ends shall be earthed at both sides to ensure static dissipation
- RoHS compliant
| 1 | immovable cast spring steel spiral |
| 2 | hose wall: polyester polyurethane |
| 3 | wall thickness between spirals ca. 0,7 mm |
