• -40°C up to +90°C
• intermittent to +125°C*
• intermittent to +125°C*
Catalogue register 1.2
Material
hose wall: polyester polyurethane with addition of flame protector (in comparison with polyether polyurethane more abrasion resistant, acc. to DIN 53516)
spiral: spring steel wire
DN 60 - DN 400
- transport hose for abrasive solids in fire risk areas
- woodworking machines
- exhaust equipment in woodworking industries
- protection hose against mechanical loadings
- conform to the requirements of the German Professional Woodworking Association
- hardly inflammable acc. to DIN 4102 B1
- extremely flexible
- super lightweight
- small bend radius
- high tensile and tear strength
- highly abrasion resistant
- continually kink proof
- compressable down to 20%
- solvents, oil and fuels resistant
- gas tight
- free of plastizisers and halogens
- generally good UV and ozone resistance
- nearly smooth inside
- optimum flow characteristics
- acc. to TRBS 2153 (zone 1, 21) suitable for non-combustible dusts/bulk
goods and gases/liquids of low conductivity. Spiral ends shall be earthed
at both sides to ensure static dissipation - RoHS compliant
| 1 | integrated spring steel wire |
| 2 | hose wall: polyester polyurethan film |
| 3 | wall thickness between spirals ca. 0,5mm |
