Miniflex PU
Technical data, custom designs and forms of delivery
DN PG work. pressure
ca. bar		 low pressure
ca. mmWS		 bend radius
ca. mm*		 outer-Ø
ca. mm		 weight
ca. kg/m		 article no.
#7 7 0,230 7700 10 10 0,06 410-007-118
#10 9 0,220 7600 14 14 0,11 410-010-118
#13 11 0,210 7550 17 17 0,13 410-013-118
#15 13,5 0,200 7500 19 19 0,14 410-015-118
#16 16 0,200 7500 21 21 0,19 410-016-118
#22 21 0,180 7350 27 27 0,24 410-022-118
25 - 0,170 7250 30 30 0,31 410-025-118
#30 29 0,150 7000 36 36 0,36 410-030-118
32 - 0,130 7000 38 38 0,44 410-032-118
#38 36 0,110 6750 45 45 0,59 410-038-118
40 - 0,100 6750 47 47 0,61 410-040-118
#44 42 0,090 6000 52 52 0,76 410-044-118
45 - 0,090 6000 53 53 0,76 410-045-118
#48 48 0,080 5400 56 56 0,81 410-048-118
50 - 0,080 5250 58 58 0,83 410-050-118
* Referring to inner side of the elbow of hose.
The above mentioned data refers to an average and ambient temperature of +20°C.
Subject to technical changes and colour variations. Please refer to technical data sheet when selecting hose.

Forms of delivery:
Available from stock:
  • the # marked nominal DN
  • Colour: blue, RAL 5015
  • Production lengths:
    DN 7 - DN 25: 50m
    DN 30 - DN 50: 25m
 Available on request:
  • transparent and coloured
  • special lengths
  • inner steel wire helix
  • special diameters
Installation and connection possibilities(further possibilities)

pgverschraubung_grau.jpg - 2kb cable protecting couplings Heat shrink cuff Heat shrink cuff
pghalter_grau.jpg coupling holder schneckengewinde_grau.jpg - 2kb Hose clamp with worm gear drive